• Servo Systems Co.

Applied Motion Products 2035XD

2035XD

The 2035XD step motor driver is a two axis, software configured step/direction or oscillator drive. Drives can be quickly and precisely configured using our eXposition™ software and a Windows PC. When configured for pulse/direction mode, the two drives can be commanded by the step and direction signals available from many PLCs and step motor indexers. In oscillator mode, the two drives generate their own acceleration and deceleration profiles and are commanded by digital run/stop signals. These signals can be supplied by PLCs, mechanical switches, single board computers or other motion control devices. Speeds may be fixed or can be set “on the fly” by 0 to 5 volt analog signals.


Features include:

  • Dual-axis control
  • Step & direction
  • Oscillator (velocity)
  • Microstepping
  • Idle current reduction
  • Optically isolated inputs

For more information visit our support center


SPECIFICATIONS

Part Number 1000-256
Supply Voltage 12-35 VDC
Supply Voltage Type DC
Control Modes •Step & Direction
•Velocity (Oscillator)
Output Current 0.1-2.0 A/phase
Communication Ports RS-232
Encoder Feedback No
Step Resolution •Full
•Half
•Microstepping
Idle Current Reduction 50-97%
Setup Method Software setup
Digital Inputs 4
Digital Outputs 1
Analog Inputs 2
Dimensions 4.0 x 3.0 x 1.5 inches
Weight NA
Operating Temperature Range 0 to 70 °C
Ambient Temperature Range 0 to 50 °C
Ambient Humidity 90% max, non-condensing
Status LEDs 1 red (power)
Circuit Protection NA