This two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications. The motor comes with an integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive. When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.
•The HT23-548 has been superseded by the HT23-552 for use in all new applications with the STAC6.
•The HT23-550 has been superseded by the HT23-554 for use in all new applications with the STAC6.
•The HT23-549 has been superseded by the HT23-553 for use in all new applications with the STAC6.
For more information visit our support center
|Part Number||Frame Size||Length (inches)||Holding Torque (oz-in)||Series Current (A/phase)||Parallel Current (A/phase)||Rotor Inertia (oz-in-sec2|