• Servo Systems Co.

Carson 17 EP

17 EP

The Eliminator Planetary (EP) line of gearheads is one of Carson Mfg. most economical high end line designed for strenuous applications. Made with standard ratios from 3:1 to 100:1. They are capable of producing ratios up to 10,000:1


  • Dynamic radial shaft seal at the input and output
  • Enclosure rating = IP65
  • Operating temperature range = -20°F to 250°F
  • Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell
  • Alloy steel powder coated ring gear
  • Quality sealed radial ball bearings
  • Stainless steel output shaft
  • Hardened precision gearing throughout
  • Precision clamp on pinion with four clamping screws to eliminate slippage

For more information visit our support center


SINGLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
17EP003 3:1 197 140 115 3.25 x 10-5
17EP004 4:1 177 136 116 1.60 x 10-5
17EP005 5.5:1 157 129 113 1.10 x 10-5
17EP007 7:1 143 122 110 9.56 x 10-6
17EP010 10:1 113 101 93 8.36 x 10-6

DOUBLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
17EP016 16:1 211 194 182 1.59 x 10-5
17EP022 22:1 216 201 193 1.10 x 10-5
17EP028 28:1 218 207 199 9.54 x 10-6
17EP040 40:1 220 212 207 8.35 x 10-6
17EP049 49:1 158 154 152 9.44 x 10-6
17EP055 55:1 183 177 175 8.31 x 10-6
17EP070 70:1 160 156 154 8.30 x 10-6
17EP100 100:1 122 120 119 8.29 x 10-6

GENERAL SPECIFICATIONS

Construction Type Ratio Backlash: Standard (arc-minutes) Backlash: Low Backlash (arc-minutes) Efficiency Weight (lbs) Maximum Tested Input rpm
Single Stage 3:1 to 10:1 6 3 90% 1.14 5000
Double Stage 16:1 to 100:1 10 7 85% 1.62 5000