• Servo Systems Co.

Carson 17 PL

17 PL

The Precision Planetary (PL) line of gearheads is Carson Mfg.'s high end line designed for the most strenuous applications. Made with standard ratios from 3:1 to 100:1. We are capable of producing ratios up to 10,000:1


  • Dynamic radial shaft seal at the input and output
  • Enclosure rating = IP65
  • Operating temperature range = -20°F to 250°F
  • Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell
  • Alloy steel powder coated ring gear
  • Quality sealed radial ball bearings
  • Stainless steel output shaft
  • Hardened precision gearing throughout
  • Precision clamp on pinion with four clamping screws to eliminate slippage

For more information visit our support center


SINGLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
17PL003 3:1 243 169 137 3.25 x 10-5
17PL004 4:1 220 166 140 1.60 x 10-5
17PL005 5.5:1 197 159 139 1.10 x 10-5
17PL007 7:1 180 151 135 9.56 x 10-6
17PL010 10:1 143 126 116 8.36 x 10-6

DOUBLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
17PL016 16:1 304 276 259 1.59 x 10-5
17PL022 22:1 311 289 275 1.10 x 10-5
17PL028 28:1 394 296 285 9.54 x 10-6
17PL040 40:1 319 306 296 8.35 x 10-6
17PL049 49:1 230 224 219 9.44 x 10-6
17PL055 55:1 264 256 251 8.31 x 10-6
17PL070 70:1 231 226 224 8.30 x 10-6
17PL100 100:1 176 174 173 8.29 x 10-6

GENERAL SPECIFICATIONS

Construction Type Ratio Backlash: Standard (arc-minutes) Backlash: Low Backlash (arc-minutes) Efficiency Weight (lbs) Maximum Tested Input rpm
Single Stage 3:1 to 10:1 6 3 90% 1.00 5000
Double Stage 16:1 to 100:1 10 7 85% 1.60 5000