• Servo Systems Co.

Carson 17 SP

17 SP

The "S" Series Planetary (SP) line of gearheads is Carson Mfg.'s most economical line designed for light duty applications. Made with standard ratios from 4:1 to 100:1. We are capable of producing ratios up to 10,000:1


  • Dynamic radial shaft seal at the input and output
  • Enclosure rating = IP65
  • Operating temperature range = -20°F to 250°F
  • Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell
  • Alloy steel powder coated ring gear
  • Quality sealed radial ball bearings
  • Stainless steel output shaft
  • Hardened precision gearing throughout
  • Precision clamp on pinion with four clamping screws to eliminate slippage

For more information visit our support center


SINGLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
17SP004 4:1 75 57 49 1.28 x 10-5
17SP007 7:1 60 51 46 7.56 x 10-6
17SP010 10:1 48 43 39 6.69 x 10-6

DOUBLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
17SP016 16:1 81 74 70 1.27 x 10-5
17SP028 28:1 83 79 76 7.63 x 10-6
17SP049 49:1 61 59 58 7.55 x 10-6
17SP070 70:1 61 60 59 6.64 x 10-6
17SP100 100:1 47 46 46 6.63 x 10-6

GENERAL SPECIFICATIONS

Construction Type Ratio Backlash: Standard (arc-minutes) Backlash: Low Backlash (arc-minutes) Efficiency Weight (lbs) Maximum Tested Input rpm
Single Stage 4:1 to 10:1 12 6 95% 0.59 5000
Double Stage 16:1 to 100:1 16 10 90% 0.88 5000