Carson 23 EP
The Eliminator Planetary (EP) line of gearheads is our economical high end line designed for strenuous applications. Made with standard ratios from 3:1 to 100:1. We are capable of producing ratios up to 10,000:1
- Dynamic radial shaft seal at the input and output
- Enclosure rating = IP65
- Operating temperature range = -20°F to 250°F
- Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell
- Alloy steel powder coated ring gear
- Quality sealed radial ball bearings
- Stainless steel output shaft
- Hardened precision gearing throughout
- Precision clamp on pinion with four clamping screws to eliminate slippage
For more information visit our support center
SINGLE STAGE
| Part # | Ratio | Continuous Output Torque at 1500 rpm Input (in-lbs) | Continuous Output Torque at 3500 rpm Input (in-lbs) | Continuous Output Torque at 5000 rpm Input (in-lbs) | Gearhead Inertia at Input (lb-in-sec2) |
|---|---|---|---|---|---|
| 23EP003 | 3:1 | 442 | 292 | 232 | 1.22 x 10-4 |
| 23EP004 | 4:1 | 410 | 294 | 242 | 5.24 x 10-5 |
| 23EP005 | 5.5:1 | 373 | 288 | 247 | 2.65 x 10-5 |
| 23EP007 | 7:1 | 344 | 279 | 245 | 1.93 x 10-5 |
| 23EP010 | 10:1 | 277 | 238 | 215 | 1.35 x 10-5 |
DOUBLE STAGE
| Part # | Ratio | Continuous Output Torque at 1500 rpm Input (in-lbs) | Continuous Output Torque at 3500 rpm Input (in-lbs) | Continuous Output Torque at 5000 rpm Input (in-lbs) | Gearhead Inertia at Input (lb-in-sec2) |
|---|---|---|---|---|---|
| 23EP016 | 16:1 | 521 | 463 | 427 | 5.32 x 10-5 |
| 23EP022 | 22:1 | 536 | 490 | 460 | 2.70 x 10-5 |
| 23EP028 | 28:1 | 545 | 506 | 481 | 1.96 x 10-5 |
| 23EP040 | 40:1 | 553 | 525 | 506 | 1.36 x 10-5 |
| 23EP049 | 49:1 | 400 | 385 | 375 | 1.90 x 10-5 |
| 23EP055 | 55:1 | 460 | 443 | 432 | 1.34 x 10-5 |
| 23EP070 | 70:1 | 404 | 393 | 385 | 1.33 x 10-5 |
| 23EP100 | 100:1 | 308 | 303 | 298 | 1.33 x 10-5 |
GENERAL SPECIFICATIONS
| Construction Type | Ratio | Backlash: Standard (arc-minutes) | Backlash: Low Backlash (arc-minutes) | Efficiency | Weight (lbs) | Maximum Tested Input rpm |
|---|---|---|---|---|---|---|
| Single Stage | 3:1 to 10:1 | 6 | 3 | 90% | 2.29 | 5000 |
| Double Stage | 16:1 to 100:1 | 10 | 7 | 85% | 3.42 | 5000 |
Compatible Products
These products are compatible with Carson 23 EP. Contact us today to order pre-assembled parts from Servo Systems. For more information visit our Value-Added Service page
MOOG Animatics
SM23 Series SmartMotors
This NEMA 23 gearhead works with all MOOG Animatics SM23 Series SmartMotors.
Schneider Electric
23 Lexium MDrive
The Lexium MDrive has two options: Pulse/direction input with an integrated motor + driver and Motion Control with an integrated motor + driver + programmable controller is designed to work with this planetary gearhead.
Applied Motion Products
NEMA 23
Brushless DC servo motor with high resolution encoder feedback that works with this gearhead.