• Servo Systems Co.

Carson 23 PL

23 PL

The Precision Planetary (PL) line of gearheads is Carson Mfg.'s high end line designed for the most strenuous applications. Made with standard ratios from 3:1 to 100:1. They are capable of producing ratios up to 10,000:1


  • Dynamic radial shaft seal at the input and output
  • Enclosure rating = IP65
  • Operating temperature range = -20°F to 250°F
  • Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell
  • Alloy steel powder coated ring gear
  • Quality sealed radial ball bearings
  • Stainless steel output shaft
  • Hardened precision gearing throughout
  • Precision clamp on pinion with four clamping screws to eliminate slippage

For more information visit our support center


SINGLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
23PL003 3:1 520 343 273 1.22 x 10-4
23PL004 4:1 482 346 285 5.24 x 10-5
23PL005 5.5:1 439 339 290 2.65 x 10-5
23PL007 7:1 405 329 288 1.93 x 10-5
23PL010 10:1 325 280 253 1.35 x 10-5

DOUBLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
23PL016 16:1 698 619 571 5.32 x 10-5
23PL022 22:1 716 654 614 2.70 x 10-5
23PL028 28:1 728 676 643 1.96 x 10-5
23PL040 40:1 740 703 676 1.36 x 10-5
23PL049 49:1 535 515 501 1.90 x 10-5
23PL055 55:1 615 593 578 1.34 x 10-5
23PL070 70:1 540 525 515 1.33 x 10-5
23PL100 100:1 411 404 399 1.33 x 10-5

GENERAL SPECIFICATIONS

Construction Type Ratio Backlash: Standard (arc-minutes) Backlash: Low Backlash (arc-minutes) Efficiency Weight (lbs) Maximum Tested Input rpm
Single Stage 3:1 to 10:1 6 3 90% 2.05 5000
Double Stage 16:1 to 100:1 10 7 85% 3.30 5000