• Servo Systems Co.

Carson 34 EP

34 EP

The Eliminator Planetary (EP) line of gearheads is our economical high end line designed for strenuous applications. Made with standard ratios from 3:1 to 100:1. They are capable of producing ratios up to 10,000:1


  • Dynamic radial shaft seal at the input and output
  • Enclosure rating = IP65
  • Operating temperature range = -20°F to 250°F
  • Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell
  • Alloy steel powder coated ring gear
  • Quality sealed radial ball bearings
  • Stainless steel output shaft
  • Hardened precision gearing throughout
  • Precision clamp on pinion with four clamping screws to eliminate slippage

For more information visit our support center


SINGLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
34EP003 3:1 1010 615 475 6.77 x 10-4
34EP004 4:1 972 643 513 2.77 x 10-4
34EP005 5.5:1 913 657 543 1.51 x 10-4
34EP007 7:1 859 653 554 1.11 x 10-4
34EP010 10:1 707 575 505 7.90 x 10-5

DOUBLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
34EP016 16:1 1350 1145 1027 2.86 x 10-4
34EP022 22:1 1401 1243 1133 1.55 x 10-4
34EP028 28:1 1432 1293 1203 1.11 x 10-4
34EP040 40:1 1469 1362 1293 8.04 x 10-5
34EP049 49:1 1067 1010 971 1.11 x 10-4
34EP055 55:1 1228 1165 1123 7.94 x 10-5
34EP070 70:1 1081 1040 1010 7.90 x 10-5
34EP100 100:1 827 805 790 7.87 x 10-5

GENERAL SPECIFICATIONS

Construction Type Ratio Backlash: Standard (arc-minutes) Backlash: Low Backlash (arc-minutes) Efficiency Weight (lbs) Maximum Tested Input rpm
Single Stage 3:1 to 10:1 6 3 90% 5.67 5000
Double Stage 16:1 to 100:1 10 7 85% 8.41 5000