• Servo Systems Co.

Carson 34 PL

34 PL

The Precision Planetary (PL) line of gearheads is Carson Mfg.'s high end line designed for the most strenuous applications. Made with standard ratios from 3:1 to 100:1. They are capable of producing ratios up to 10,000:1


  • Dynamic radial shaft seal at the input and output
  • Enclosure rating = IP65
  • Operating temperature range = -20°F to 250°F
  • Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell
  • Alloy steel powder coated ring gear
  • Quality sealed radial ball bearings
  • Stainless steel output shaft
  • Hardened precision gearing throughout
  • Precision clamp on pinion with four clamping screws to eliminate slippage

For more information visit our support center


SINGLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
34PL003 3:1 1189 724 560 6.77 x 10-4
34PL004 4:1 1144 757 604 2.77 x 10-5
34PL005 5.5:1 1074 773 638 1.51 x 10-5
34PL007 7:1 1011 768 651 1.11 x 10-5
34PL010 10:1 832 677 594 7.90 x 10-5

DOUBLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
34PL016 16:1 1805 1531 1374 2.86 x 10-5
34PL022 22:1 1874 1650 1515 1.55 x 10-5
34PL028 28:1 1915 1728 1609 1.14 x 10-5
34PL040 40:1 1963 1821 1728 8.04 x 10-5
34PL049 49:1 1428 1351 1298 1.11 x 10-5
34PL055 55:1 1640 1558 1501 9.94 x 10-5
34PL070 70:1 1445 1390 1351 7.90 x 10-5
34PL100 100:1 1106 1078 1056 7.87 x 10-5

GENERAL SPECIFICATIONS

Construction Type Ratio Backlash: Standard (arc-minutes) Backlash: Low Backlash (arc-minutes) Efficiency Weight (lbs) Maximum Tested Input rpm
Single Stage 3:1 to 10:1 6 3 90% 5.47 5000
Double Stage 16:1 to 100:1 10 7 85% 8.85 5000