• Servo Systems Co.

Carson 42 PL

42 PL

The Precision Planetary (PL) line of gearheads is Carson Mfg.'s high end line designed for the most strenuous applications. Made with standard ratios from 3:1 to 100:1. They are capable of producing ratios up to 10,000:1


  • Dynamic radial shaft seal at the input and output
  • Enclosure rating = IP65
  • Operating temperature range = -20°F to 250°F
  • Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell
  • Alloy steel powder coated ring gear
  • Quality sealed radial ball bearings
  • Stainless steel output shaft
  • Hardened precision gearing throughout
  • Precision clamp on pinion with four clamping screws to eliminate slippage

For more information visit our support center


SINGLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
42PL003 3:1 2022 1175 894 2.27 x 10-3
42PL004 4:1 1993 1256 983 1.02 x 10-3
42PL005 5.5:1 1913 1312 1062 5.87 x 10-4
42PL007 7:1 1826 1327 1101 4.56 x 10-4
42PL010 10:1 1527 1196 1029 3.52 x 10-4

DOUBLE STAGE

Part # Ratio Continuous Output Torque at 1500 rpm Input (in-lbs) Continuous Output Torque at 3500 rpm Input (in-lbs) Continuous Output Torque at 5000 rpm Input (in-lbs) Gearhead Inertia at Input (lb-in-sec2)
42PL016 16:1 3346 2745 2419 1.05 x 10-3
42PL022 22:1 3503 3003 2711 6.01 x 10-4
42PL028 28:1 3599 3173 2913 4.65 x 10-4
42PL040 40:1 3711 3383 3173 3.57 x 10-4
42PL049 49:1 2710 2530 2411 4.56 x 10-4
42PL055 55:1 3118 2923 2793 3.53 x 10-4
42PL070 70:1 2754 2621 2530 3.52 x 10-4
42PL100 100:1 2113 2043 1994 3.51 x 10-4

GENERAL SPECIFICATIONS

Construction Type Ratio Backlash: Standard (arc-minutes) Backlash: Low Backlash (arc-minutes) Efficiency Weight (lbs) Maximum Tested Input rpm
Single Stage 3:1 to 10:1 6 3 90% 10.37 5000
Double Stage 16:1 to 100:1 10 7 85% 16.89 5000