IMS's MDrive14 High Torque Integrated Motor and Driver is ideally suited for designers who want the simplicity  of a motor with on-board electronics, but without the cost of an indexer on each axis. The integrated electronics eliminate the need to run the motor cabling through the machine, reducing the potential for problems due to electrical noise.

The MDrive14 uses a NEMA 14 frame size 1.8 deg. high torque motor combined with a half/full step drive. Setup parameters include Motor Resolution, Motor Direction with respect to the direction input, and Run/Hold currents.  These settings may be changed, downloaded and stored in non-volatile memory with the use of a simple GUI which is provided. This eliminates the need for external switches or resistors. Parameters are changed via an SPI port located on connector P1. Operating voltage for the MDrive14 ranges from +12 to +48 VDC.

The MDrive14 is available in multiple configurations to fit various system needs including a single shaft stand-alone device, or a dual shaft rotary motor available with optical encoder or control knob, planetary gearbox, and a long life Acme screw linear actuator. Interface connections are accomplished using a 12 position pluggable keyed and locking pin and receptacle.

FEATURES:

	Integrated half/full step drive and NEMA 14
	high torque stepping motor
	+12 to +48 VDC input voltage
	Low cost
	Extremely compact
	Optically isolated logic inputs will accept +5
	to +24 VDC signals, sourcing or sinking
	Automatic current reduction
	Configurable: motor run/hold current, motor
	direction vs. direction input, half/full step
	Available configurations: single shaft, long
	life linear actuator, optical encoder, control
	knob for manual positioning, integrated
	planetary gearbox
	Single supply
	Interface uses a 12 position, pluggable 2 mm
	pin and receptacle (C connector)
	Graphical user interface (GUI) for quick and
	easy parameter setup

Please contact our Sales Staff for pricing information.