NEW!

IMS's MDrive34Plus Microstepping high torque integrated motor and driver is ideal for designers who want the simplicity of a motor with on-board electronics. The integrated electronics of the MDrive34Plus eliminate the need to run the motor cabling through the machine, reducing the potential for problems due to electrical noise.

The unsurpassed smoothness and performance delivered by the MDrive34Plus Microstepping are achieved through IMS's advanced 2nd generation current control. By applying innovative techniques to control current flow through the motor, resonance is significantly dampened over the entire speed range and audible noise is reduced.

The MDrive34Plus accepts a broad input voltage range from +12 to +75 VDC, delivering enhanced performance and speed. Oversized input capacitors are used to minimize power line surges, reducing problems that can occur with long runs and multiple drive systems. An extended operating range of -40° to +85° C provides long life, trouble free service in demanding environments.

The MDrive34Plus uses a NEMA 34 frame size high torque brushless motor combined with a microstepping driver, and accepts up to 20 resolution settings from full to 256 microsteps per full step, including: degrees, metric and arc minutes. These settings may be changed on-the-fly or downloaded and stored in non-volatile memory with the use of a simple GUI which is provided. This eliminates the need for external switches or resistors. Parameters are changed via an SPI port.

The versatile MDrive34Plus Microstepping is available in multiple configurations to fit various system needs. Rotary motor versions come in three lengths and may include an optical encoder, control knob, planetary gearbox or linear slide. A long life Acme screw linear actuator* is also available. Interface connections are accomplished using either a pluggable locking wire crimp, terminal strip or 12.0" (30.5cm) flying leads.

The MDrive34Plus is a compact, powerful and inexpensive solution that will reduce system cost, design and assembly time for a large range of brushless motor applications.

FEATURES:

	Highly integrated microstepping driver and
	NEMA 34 high torque brushless motor
	Advanced 2nd generation current control for
	exceptional performance and smoothness
	Singe supply +12 to +75 VDC
	Low cost
	Extremely compact
	20 microstep resolutions up to 51,200 steps
	per rev including: degrees, metric, arc
	minutes
	Optically isolated logic inputs will accept +5
	to +24 VDC signals, sourcing or sinking
	Automatic current reduction
	Configurable: motor run/hold current; motor
	direction vs. direction input; microstep
	resolution; clock type: step and direction,
	quadrature, step up and step down;
	programmable digital filtering for clock and
	direction inputs
	Available options: long life linear actuator*;
	external optical encoder; integrated
	planetary gearbox; control knob for manual
	positioning
	3 rotary motor lengths available
	Current and microstep resolution may be
	switched on-the-fly
	Interface options: pluggable locking wire
	crimp; 12.0" (30.5cm) flying leads
	Graphical user interface (GUI) for quick and
	easy parameter setup

*Consult Servo Systems Co. for availability.

Please contact our Sales Staff for pricing information.