• Servo Systems Co.

MOOG Animatics VL-CT35 Pulley Set

MOOG Animatics VL-CT35 Pulley Set

The VL-CT35 Pulley Offset is a simple low cost slider type design incorporating an LM guide rail as the actuator’s base. Component count is reduced, and the performance/cost ratio is excellent for the system which integrates an Animatics SmartMotor™ SM2315D as standard.


  • Linear ball screw system components
  • Brushless DC Servo Motor
  • Encoder
  • Amplifier
  • Controller with microprocessor
  • I/O, 5 V with 24 V available with accessory cable
  • Network capability
  • Firmware
  • Integrated brake option

For more information visit our support center


SPECIFICATIONS

Motor Animatics SmartMotors Size 23
Coupling Beam
Ball Screw Leads 12 mm/rev
Position Sensors Consult factory
Stroke Lengths 50, 100, and 150 mm
Overall Length Stroke + 244.9 mm
Over-Travel 0
Unit Mass 1.1667 + (stroke, mm)*0.003 kg
Unidirectional Repeatability 20 µm
Bidirectional Repeatability 40 µm
Accuracy 0.021/300 mm/mm
Max Velocity 470 - 1000 mm/s (stroke dependent)
Max Acceleration 0.3 G
Payload Mass 110 or 88 kg (5 or 10 mm/rev lead)
Rated Velocity 400 mm/s