• Servo Systems Co.

MOOG Animatics VL-CT55

MOOG Animatics VL-CT55

The VL-CT55 is a simple low cost slider type design incorporating an LM guide rail as the actuator’s base. Component count is reduced, and the performance/cost ratio is excellent for the system which integrates an MOOG Animatics SmartMotor™ SM2315D as standard.


  • Linear ball screw system components
  • Brushless DC Servo Motor
  • Encoder
  • Amplifier
  • Controller with microprocessor
  • I/O, 5 V with 24 V available with accessory cable
  • Network capability
  • Firmware
  • Integrated brake option
  • Strokes of 50-150mm in 50mm steps
  • Available with Pulley Offset

For more information visit our support center


SPECIFICATIONS

Motor Animatics SmartMotors Size 23
Coupling Beam
Ball Screw Leads 12 mm/rev
Position Sensors Consult factory
Stroke Lengths 50, 100, 150, 200, 250 and 300 mm
Overall Length Stroke + 2274.9 mm
Over-Travel 0
Unit Mass 1.94 + (stroke, mm)*0.0075 kg
Unidirectional Repeatability 20 µm
Bidirectional Repeatability 40 µm
Accuracy 0.021/300 mm/mm
Max Velocity 470 - 1000 mm/s (stroke dependent)
Max Acceleration 0.3 G
Payload Mass 22 kg
Rated Velocity 400 mm/s