• Servo Systems Co.

Servo Systems Co. Rotary Table RPS-4.5-7

RPS-4.5-7

Rotary positioning system weighing 4.4 lb., with a maximum output torque of 7 in.-lb. Comes with a motor mount standard NEMA 17. Protected against polarity reversal, but not short circuit protected. The RPS has a built-in Normally Open home switch--specify NPN or PNP when ordering.


For more information visit our support center


SPECIFICATIONS

Unit Weight 4.4 lb.
Moving Mass 1.138 lb.
Maximum Input Speed 2700 rpm
Table Top Inertia 1.387E+00 lb.-in.2
Input Shaft Inertia 1.716E-03 lb.-in.2
Dynamic Moment 177.04 in.-lb.
Maximum Input Torque 2.9 oz.-in.
Maximum Output Torque 7 in.-lb.
Payload 62.8 lb.
Standard Ratio 180:1
Maximum Table Top Speed 15 rpm
Gearset Efficiency 43%
Breakaway Torque 2.8 oz.-in.

XLPS DUAL POSITION LIMIT / HOME SENSOR SPECIFICATIONS

Power Consumption ‹0.36 W
Max. Switching Current 100 mA
Voltage Drop ‹1.5 V
Max. Switching Frequency 5 kHz
Output Indicator Red LED
Protection Class IP67 (sensor only)
Connection 9-pin D-sub Male
Pin Function Pin 1: Sensor Power (10-30 VDC)
Pin 3: Sensor Ground
Pin 5: Home Signal