PREVIOUS STEP MOTOR & DRIVE SPECIALS

MORE STEP MOTOR & DRIVE SPECIALS

	Rated Voltage: 2.3 VDC, 1.5 AMP
	Step Angle: 1.8 deg. (four wires)
	Holding Torque: 55.5 oz.-in.
	Resistance: 1.5 ohm/phase
	Body Dimensions: 42 mm square flange with (4) 4-40 tapped holes for
	mounting x 31 mm L
	Shaft Dimensions: 0.172 in. dia. x 0.720 in. L
	Weight: 6 oz.

Stock No. WSM-224

Special Price  .  .  .  .  .  .  .  .  .  .  $19.00 ea.

	1.8 deg. 2-phase (4-wire)
	Rated Voltage: 3.28 VDC
	Rated Current: 2.0 A
	DC Resistance: 1.64 ohms / phase
	Holding Torque: 34 oz.-in.
	Body Dimensions: 1.5 in. square flange x 2.0 in. L
	Front Shaft Dimensions: 0.1875 in. dia. x 0.50 in. L
	Rear Shaft Dimensions: same

Stock No. WSM-228

Special Price  .  .  .  .  .  .  .  .  .  .  $10.00 ea.

	1.8 deg. 2-phase (4-wire)
	Rated Voltage: 9.9 VDC
	Rated Current: 1 A
	DC Resistance: 9.9 ohms / phase
	Holding Torque: 30 oz.-in.
	Body Dimensions: 1.81 in. square x 1.577 in.
	Shaft Dimensions: 0.196 in. dia. x 1.697 in. L

Stock No. WSM-229

Special Price  .  .  .  .  .  .  .  .  .  .  .  $5.00 ea.

	1.8 deg. 2-phase (8-pin)
	Rated Voltage: 1.98 VDC
	Rated Current: 3.3 A
	DC Resistance: 0.6 ohms
	Holding Torque: 78 oz.-in.
	Body Dimensions: NEMA 23 x 2 in. L
	Shaft Dimensions: 0.250 in. x 0.750 in. L

Stock No. WSM-233

Special Price  .  .  .  .  .  .  .  .  .  .  $20.00 ea.

	3.6 deg. 2-phase (8-wire)
	Rated Current: 3.7 A
	DC Resistance: 0.34 ohms / phase (8 leads, 3.6 deg. step angle works with
	standard bipolar chopper drives)
	Holding Torque: 33.4 oz.-in.
	Body Dimensions: 52 mm square flange x 30 mm
	Shaft Dimensions: 5 mm dia. x 20.5 mm L (flat)

Stock No. WSM-234

Special Price  .  .  .  .  .  .  .  .  .  .  $15.00 ea.

	Rated for 6 VDC at 0.67 A
	Step Angle: 1.8 deg. (6 wires)
	Holding Torque: 11.9 oz.-in.
	Resistance: 9.0 ohms/phase
	Body Dimensions: 42 mm square with (4) 4-40 tapped holes on face for
	mounting x 34 mm L
	Shaft Dimensions: 0.197 in. dia. x 0.86 in. L
	Weight: 250 g
	Connection via 6 wire leads 12 in. L

Stock No. WSM-237

Special Price  .  .  .  .  .  .  .  .  .  .  $12.50 ea.

	Step Angle: 7.5 deg.
	Travel Length: 2 in.
	Voltage: 5 VDC
	DC Resistance: 11 ohms / phase

Stock No. WSM-238

Special Price  .  .  .  .  .  .  .  .  .  .  $38.00 ea.

	Rated: 3.2 VDC at 2.0 A
	Resistance: 1.6 ohms
	Inductance: 4.0 mh
	Maximum Linear Force: 46 lbs.
	Body Dimensions: 2.25 square mounting flange with 4 holes x 1.60 in. L

Stock No. WSM-248

Special Price  .  .  .  .  .  .  .  .  .  .  $99.00 ea.*

*Price does not include leadscrew thread: 1/4 x 20 Acme at $3.00 per inch 

	Rated: 5 VDC at 1 A
	Holding Torque: 60 oz.-in.
	Steps per Revolution: 200
	Body Dimensions: 2.22 square mounting flange with 4 holes x 1.92 in. L
	Shaft Dimensions: 0.250 in. dia. with 0 flats x 0.770 in. L

Stock No. WSM-251

Special Price  .  .  .  .  .  .  .  .  .  .  $46.50 ea.

PREVIOUS STEP MOTOR & DRIVE SPECIALS

MORE STEP MOTOR & DRIVE SPECIALS

SPECIAL SAVINGS & PRODUCT CLOSE-OUTS