Features:

• +12 to +48 VDC power supply input.
• 6 Amps Cont., 6 Amps Peak (2 seconds).
• 2 and 4 quadrant modes.
• Sinusoidal and Trapezoidal commutation modes.
• 20 kHz, 40 kHz and 80 kHz of programmable PWM frequency options.
• Current, Speed, Step and Direction modes of operation.
• USB Communications.
• Drive status diagnostics.
• +/-10V Analog command input.
• +/-10V Analog output (configurable).
• Digital direction input.
• Configurable ramp for current and speed.
• Brushless motor has halls-only operation mode for speed control, or encoder feedback mode for better performance at low speeds.
• Brush motor has encoder feedback mode or IxR compensation.
• Stepper motor has open-loop operation or closed-loop operation with encoder feedback.
• Step and Direction (closed-loop) available for Brushless DC, PMDC Brush and Stepper motors. Encoder required.
• Single step up to 256 microsteps open-loop control for Stepper motor (1MHz max step rate @50% ± 10% dutycycle).
• Integrated circuit for brake regeneration.
• +/- Travel limit inputs.
• 97% efficiency at full load.
• Selectable software protection options.
• Windows®-based set-up and tuning utility software included.

ElectroCraft CPP-B06V48A-SA-USB Universal Servo Drive

Output Power, Peak 288 Watts

Phase Current Peak 6 Amps (peak of sine)

Phase Current Cont. 6 Amps (peak of sine)

Output +12 to +48 VDC

Output Frequency 20, 40, 80 kHz (selectable)
Introducing ElectroCraft’s Universal Drive, the newest addition to the ElectroCraft CompletePower™ Plus family of DC motor drives. The Universal Drive takes performance, efficiency and flexibility to the next level, utilizing state-of-the-art digital drive technology combined with an intuitive and highly configurable user interface. Perfect for a wide range of industrial, commercial market, and consumer product applications. The CPP-B06V48A-SA-USB is one of four standard capacities in the model lineup. Customized versions are also offered to meet large volume OEM requirements.
• Driven by design to be one of the most space efficient, low voltage, digital servo drives available.
• Utilizes the latest in digital drive architecture to provide software selectable control mode operation.
• Compatible with Brushless motors, PMDC Brush motors, and Stepper motors (Open-Loop and Closed-Loop) from 12 to 48 VDC and up to 6A continuous, 6A peak current.
• Modes of operation include speed control, torque control or step & direction positioning for Brushless, PMDC Brush and Closed-Loop Steppers.
• Sine-wave commutation for brushless motors using either hall sensors or encoder feedback.
• Advanced Field Oriented Control (FOC) of Brushless and Closed-Loop Stepper motors provides high dynamic response resulting in a robust motor controller with low torque ripple that produces smoother, more efficient motion!
• Open-loop stepper motors support single step up to 256 micro-steps (1MHz max step rate @50% ± 10% duty-cycle).
• Encoder feedback or IxR compensation is available for PMDC Brush motors.
• Easy setup and configuration via USB interface with ElectroCraft Complete Architect™ - Windows-based software.

Servo Systems LPS

Servo Systems LPS

ElectroCraft CPP-B06V48A-SA-USB Universal Servo Drive

CPP-B06V48A-SA-USB

DATA SHEET

DESCRIPTION

ADDRESS:

CALL:

Output Power, Peak	288 Watts
Phase Current Peak	6 Amps (peak of sine)
Phase Current Cont.	6 Amps (peak of sine)
Output	+12 to +48 VDC
Output Frequency	20, 40, 80 kHz (selectable)